Journal Publications

1. Kento Nakamura, Yasuhiro Miyazaki, "Interaction buckling behaviors of square hollow section columns made of Cr-Ni type stainless steels", Proceedings of Constructional Steel, Vol.29, pp.9-16, 2021.
2. Yusaku Ymada, Yasuhiro Miyazaki, Yasumi Shimura, "The Charpy absorption energy made of Cr-Ni type stainless steel thick plates", Proceedings of Constructional Steel, Vol.29, pp.1-8, 2021.
3. Yasuhiro Miyazaki, Yu Hoshino, Takanori Ohnishi, Yasumi Shimura, Yusuke Kobayashi, Atsushi Shibuya, "CORROSION PROPERTIES DUE TO DIFFERENCES IN THE INSULATION METHOD OF SPECIMENS IN WHICH CARBON STEEL PLATES JOINED WITH STAINLESS STEEL HIGHSTRENGTH BOLTS", JSSC Steel Construction Engineering, Vol.28, No.111, pp.27-38, 2021.
4. Yasuhiro MIYAZAKI, Mahmudur RAHMAN, Yoshiaki OKUI "THE LIMIT STATES COMPRESSIVE STRENGTH ESTIMATION FOR SIMPLE STIFFENED PLATE WITH LARGE ASPECT RATIO", Journal of Japan Society of Civil Engineers, Ser. A1 (Structural Engineering & Earthquake Engineering (SE/EE)), Vol.76, No.1, pp.67-81, 2020.
5. Akane Izaki, Yaushiro Miyazaki, Kiyoshi Ono, Takeshi Miyashita "The material properties and formulation of the stress-strain relationship for Cr-Ni type stainless steel", Proceedings of Constructional Steel, Vol.27, pp.1-9, 2019.
6. Eitaro Horisawa, Yaushiro Miyazaki, "The evaluation method for compressive and bending strength of steel member made of stainless steel at both ends", Journal of Structural Engineering. A, Vol.65, pp. 1-14, 2019.
7. Toshihiro Miki, Yaushiro Miyazaki, "Variation of collapse mechanisms of rotationally restrained steel columns with variable cross-section subjected to cyclic bending under alternating axial force", Journal of Structural Engineering. A, Vol.65, pp. 26-39, 2019.
8. Yaushiro Miyazaki, Kazuo Ohgaki, "Compressive strength behaviors of stub-column made of welded plates from SUS323L and SM570", Proceedings of Constructional Steel, Vol.26, pp.462-469, 2018.
9. Hironari Takahashi, Yaushiro Miyazaki, "Strength correlationships of simply-supported plates under combined in-plane bending and compression due to variation in stress-strain relationships", Journal of Structural Engineering. A, Vol.64, pp. 60-72, 2018.
10. Yaushiro Miyazaki, "The residual stress distribution of the section of welding member made of SUS323L and SM570", Proceedings of Constructional Steel, Vol.25, pp.397-403, 2017.
11. Eitaro Horisawa, Yaushiro Miyazaki, "Compressive strength behavior of carbon steel column made of stainless steel at both ends", Proceedings of Constructional Steel, Vol.25, pp.404-411, 2017.
12. Tenta Nishiwaki, Yaushiro Miyazaki, Kosuke Komi, Yukihiro Nakano, "The outdoor exposure test during two years of jointed thick plates made of stainless steel and carbon mild steel", Proceedings of Constructional Steel, Vol.25, pp.696-703, 2017.
13. Toru Ibi, Yaushiro Miyazaki, Satoshi Nara, "An evaluation method for strength of compressive stiffend plates with stainless steels and carbon mild steels between longitudinal stiffeners and plate panels", Journal of Structural Engineering. A, Vol.63, pp.78-91, 2017.
14. Yuki Wada, Yaushiro Miyazaki, "The bending strength behavior and the estimation method of the bending strength of I-section beam made of stainless steel and carbon mild steel", Journal of Structural Engineering. A, Vol.63, pp.92-105, 2017.
15. Y. Miyazaki, K. Komi, "Galvanic corrosion behavior of the welding of stainless steel and carbon steel", Mechanics of Structures and Materials: Advancements and Challenges -- Hao & Zhang (Eds), pp.207-213, 2016.12.
16. Hironari Takahashi, Yasuhiro Miyazaki, Satoshi Nara, "Influence of a Variation of the Stress Strain Relationship for the Material on the in-Plane Bending Strength Behavior of the Plate", Proceedings of Constructional Steel, Vol.24, pp.111-118, 2016.
17. Shinsuke Sato, Yasuhiro Miyazaki, "Material Behavior of the Duplex Stainless Steel by the Static Tensile Tesiting", Proceedings of Constructional Steel, Vol.24, pp.297-304, 2016.
18. Yuki Wada, Yasuhiro Miyazaki, "The Pure Bending Strength Behavior of I-section Beam Made of Hybrid Marerials", Proceedings of Constructional Steel, Vol.24, pp.313-320, 2016.
19. Yuki Wada, Yasuhiro Miyazaki, "The bending strength behavior of I-section beam made of different material of the flange and the web plates", Proceedings of Constructional Steel, Vol.23, pp.100-107, 2015.
20. Kosuke Komi, Yasuhiro Miyazaki, "Galvanic corrosion of thick plate made of welding stainless steel and carbon steel", Proceedings of Constructional Steel, Vol.23, pp.481-488, 2015.
21. Toru Ibi, Yasuhiro Miyazaki, Satoshi Nara, "Strength Behavior of Compressive Plate with One Stiffener that Cross-Section made of Different Material and Strength", Proceedings of Constructional Steel, Vol.23, pp.568-575, 2015.
22. Kiyoshi Ono, Takeshi Miyashita, Hiroyuki Aizawa, Yasuhiro Miyazaki, "Experimental Study with Mechanical Property of SBHS400", The 31 st Japan Road Congress, No. 5016, 2015.
23. Kentaro Kato, Yaushiro Miyazaki, Satoshi Nara, "Ultimate Compressive Strength for Simply Supported Stainless Steel Plates under In-plane Quasi-statically Uniaxial Loading", Journal of Structural E ngineering. A, Vol.61, pp.49-61, 2015.
24. Yasuhiro Miyazaki, Satoshi Nara, "The Strength Estimation Method and Behavior of Simply Supported Stainless Steel Plates under In-plane Shearing", Proceedings of Constructional Steel, Vol.22, pp.72-78, 2014.
25. Shinnosuke Abe, Yasuhiro Miyazaki, Satoshi Nara, "Influence of a variation of the stress strain relationship for the material on the compressive strength behavior of the plate", Proceedings of Constructional Steel, Vol.22, pp.64-71, 2014.
26. Kentaro Kato, Yasuhiro Miyazaki, Satoshi Nara, "The strength behavior of stainless steel plates under in-plane quasi-statically uniaxial loading", Proceedings of Constructional Steel, Vol.21, pp.131-138, 2013.
27. Yasuhiro Miyazaki, Satoshi Nara, "An evaluation method for ultimate compressive strength of stainless steel plates based on stress-strain diagram", JSSC Steel Construction Engineering, Vol.20, No.79, pp.67-80, 2013.
28. Yasuhiro Miyazaki, Satoshi Nara, "Strength behavior for stainless steel plate under in-plane bending", Proceedings of Constructional Steel, Vol.20, pp.261-268, 2012.
29. Takao Miyoshi, Yasuhiro Miyazaki, Satoshi Nara, "Ultimate strength of duplex stainless steel plates under uniaxial compression", Steel Construction, Vol.3, No.2, pp.90-99, 2010.
30. Yaushiro Miyazaki, Satoshi Nara, "A buckling design method for unstiffened stainless steel plates under uniaxial compression", Journal of Structural E ngineering. A, Vol.56, pp.122-134, 2010.
31. Yasuhiro Miyazaki, Akio Kamitani, Satoshi Nara, "An experimental study on ultimate strength of welded short box columns fabricated from stainless steels", Proceedings of Constructional Steel, Vol.17, pp.367-374, 2009.
32. Takao Miyoshi, Yasuhiro Miyazaki, Satoshi Nara, "Ultimate strength for duplex stainless steel SUS329J3L plate under compressive forces", Journal of Structural Engineering. A, Vol.55, pp.80-91, 2009.
33. Takao Miyoshi, Yasuhiro Miyazaki, Satoshi Nara, "Ultimate compressive behavior of simply supported plates of stainless steel SUS329J3L", Proceedings of Constructional Steel, Vol.16, pp.47-52, 2008.
34. Shogo Mori, Takao Miyoshi, Nobuhito Ochi, Yasuhiro Miyazaki, Satoshi Nara, "A study on effects of stress-strain models for austenitic stainless steel on ultimate strength of compressive plates", Proceedings of Constructional Steel, Vol.15, pp.645-652, 2007.
35. Takao Miyoshi, Nobuhito Ochi, Shogo Mori, Yasuhiro Miyazaki, Satoshi Nara, "A study on the design proof stress of stainless steel plates subjected to compression", Proceedings of Constructional Steel, Vol.15, pp.639-644, 2007.
36. Takao Miyoshi, Yasuhiro Miyazaki, Satoshi Nara, "A study on a stress-strain model of SUS410L and ultimate compressive strength of its plate", Proceedings of Constructional Steel, Vol.15, pp.633-638, 2007.
37. Yasuhiro Miyazaki, Satoshi Nara, Kiyoshi Ono, Takao Miyoshi, Shogo Mori, "Characteristics of plastic hysteresis of high performance steels and there constitutive equations", Journal of Structural Engineering. A, Vol.53, pp.25-32, 2007.
38. Satoshi Nara, Shigeyuki Murakami, Yasuhiro Miyazaki, Tomohiro Matsubara, "Compressive ultimate strength of sandwich steel plate of ultra steel and mild one", Proceedings of Constructional Steel, Vol.13, pp.303-310, 2005.

Conference

1. Daiki Kitazume, Kiyoshi Ono, Takeshi Miyashita, Yasuhiro Miyazaki, Kengo Anami, "A Basic Study on Charpy Absorbed Energy of Stainless Steel", The 12th Japanese-German Bridge Symposium, Munich, Germany, 2018.
2. Kosuke Komi, Yasuhiro Miyazaki, Yukihiro Nakano, "Galvanic Corrosion Behavior of Thick Plate Made of Stainless Steel and Carbon Mild Steel by One Year Weathered", The 11th Japanese-German Bridge Symposium, Osaka, Japan, Paper No. 097, 2016.
3. Kentaro Kato, Yasuhiro Miyazaki, Takeshi Miyashita, Kiyoshi Ono, "A Study on Modeling of Welding Residual Stress for Stainless Steel Plate", The 14th East Asia-Pacific Conference on Structural Engineering and Construction, Ho Chi Minh City, Vietnam, pp.752-758, 2016.
4. Takeshi Miyashita, Kiyoshi Ono,Yasuhiro Miyazaki, "Material Properties of SBHS400 Based on Uniaxial Tensile Test and Load-Carrynig Capacity Analysis of a Compression Plate", The 14th East Asia-Pacific Conference on Structural Engineering and Construction, Ho Chi Minh City, Vietnam, pp.768-773, 2016.
5. Kiyoshi Ono, Hiroyuki Aizawa, Takeshi Miyashita, Shinji Yamada,Yasuhiro Miyazaki, "An Experimental Study on Constitutive Equation of SBHS400 under Cyclic Loading", The 14th East Asia-Pacific Conference on Structural Engineering and Construction, Ho Chi Minh City, Vietnam, pp.1833-1838, 2016.
6. Yasuhiro Miyazaki, Satoshi Nara, "A Proposal for Compressive Design Strength of Stainless Steel Plates", The 13th East Asia-Pacific Conference on Structural Engineering and Construction, Hokkaido, Japan, A-5-5, 2013.
7. Satoshi Nara, Yasuhiro Miyazaki, "Influence of Variation in Material Strength on Ultimate Strength of Austenitic Stainless Steel Plates under In-Plane Bending and Compression", 4th International Experts Seminar on Stainless Steel in Structures, 2012.
8. Yasuhiro Miyazaki, Satoshi Nara, "Influence of Material Strength on Ultimate Strength of Austenitic Stainless Steel Plates under In-Plane Bending and Compression", The 9th Japanese-German Bridge Symposium, Kyoto, Japan, CD-ROM, 2012.
9. Takao Miyoshi, Yasuhiro Miyazaki, Satoshi Nara, "Ultimate strength of duplex stainless steel plates under uniaxial compression", The 8th Japanese-German Bridge Symposium, the Technical University of Munich, CD-ROM, 2009.
10. Yasuhiro Miyazaki, Takao Miyoshi, Nobuhito Ochi, Shogo Mori, Satoshi Nara, "Ultimate Compressive Strength and Ductility of Austenitic Stainless Steel Plate", The 7th German-Japanese Bridge Symposium, Osaka City University, CD-ROM, 2007.
11. Satoshi NARA, Yasuhiro MIYAZAKI, Kiyoshi ONO, "High Performance Structural Steel for Strong Seismic Loading", 2006 APRU/AEARU Research Symposium, pp46-48, 2006.4.