Research
- Strength behaviour for stainless steel plates
- Constitutive model
- Corrosion behaviour for stainless steel structures
- Strength behaviour for steel structures
Member
Advanced Course 2nd year
- Kento Nakamura
- Yu Hoshino
- Yusaku Yamada
- Tomoki Wada
Advanced Course 1st year
- Misaki Okamura
- Ryota Furukawa
Regular Course 5th year
- Sotaro Uchiyama
- Yuki Ohtsuka
- Sora Onda
- Naoki Kato
- Byiringiro Brice Ali
- Mai Yanagisawa
- Wakana Yamamoto
Bachelor
2022
-
Yuto Kimura,
"The mechanical behavior of the varying cross section column made of
steel under cyclic loading"
2021
-
Akane Izaki,
"The Buckling Evaluation Method of the Shape Steel Members made of
the Austenic and the Lean Duplex types Stainless Steels under Compression"
2019
-
Tenta Nishiwaki,
"Crrosion Behaviors of Thick Plate made of Jointed Stainless Steel
and Carbon Mild Steel"
-
Eitaro Horisawa,
"Compressive or Bending Strength Estimation Method of Steel Member
made of Stainless Steel at Both Ends"
2018
-
Shinsuke Sato,
"Material Behaviors of Stainless Steel Considering Rate Dipendent
and Propose Material Model under Uniaxial Progressive Loading"
-
Hironari Takahashi,
"The Strength Estimation Method of Simply Supported Plate under
in-plane Compression and Bending that Considered Material Variance"
2017
-
Toru Ibi,
"The Buckling Estimation Method of Compressive Stiffend Plates
Made of Stainless Steel and Carbon Mild Steel"
-
Kosuke Komi,
"The Expression of Galvanic Corrosion of Combined Stainless Steel
and Carbon Mild Steel Thick Plates under Outdoor Environment"
-
Yuki Wada,
"The Estimation Method and Strength Behavior of
I-section Beam made of Stainless Steel and
Carbon Mild Steel under Pure Bending"
2015
-
Shinnosuke Abe,
"The Impact of the Stress-Strain Relationship on Compressive Strength Behavior
of the Simply Supported Plate"
-
Kentaro Kato,
"The Strength Behavior of Simply Supported Stainless Steel Plate under
in-Plane Quasi Statically Loading"
Associate
2022
- Misaki Okamura,
"Change of initial imperfections due to corrosion in welded SM490Y members"
- Ryosuke Takahashi,
"Strength behaviors of the plate girder bridges with secondary members replaced with stainless steel"
- Chikura Kodai,
"Determination of shear bond strength for using CFRP adhesive method on SUS304L"
- Takumi Nishiyama,
"Compressive strength behaviors I section beam made of Stainless steel"
- Ryota Furukawa,
"The compressive strength behaviors of angle and tee section columns made of stainless steel"
2021
- Momoka Kagoshima,
"The tensile strength characteristic of the butt-welded plates made of stainless steel and carbon steel
before and after corrosion"
- Kento Nakamura,
"Interaction buckling strength of square hollow section column made of carbon steel and stainless"
- Yu Hoshino,
"Corrosion behaviour of SM490Y plate joined with 10T-SUS bolts due to
different insulation methods"
- Yusaku Yamada,
"Effect of Tensile Pre-Strain on Charpy Impact Value of Thick Stainless Steel Plates"
- Tomoki Wada,
"Prediction of initial imperfections in welded stainless steel by numerical analysis"
2020
- Yuto Kimura,
"Analytical study on instability phenomenon expression of varying
cross section column made of ordinary carbon mild steel"
- Tatsuki Sato,
"The Mechanical Behaviors of the non-uniform Steel Column by
the Shell Elements under quasi-Static Loading"
- Hiroki Mizoguchi,
"The corrosion behaviors of the carbon mild steel plate with the
stainless steel high stension bolt joint"
2019
-
Akane Izaki,
"Adaptivity of the 2-interval Ramberg-Osgood Curve
and the Material Behavior for Cr-Ni type Stainless Steel"
- Shiori Sano,
"The Ultimate Compressive Strength of the one-Stiffener Stiffened
Plate made of SBHS500"
- Saoyiavang Bengvang,
"The Mechanical Behaviors of the non-uniform Steel Column by
the Shell Elements under quasi-Static Loading"
2018
-
Tsukasa Kaneko,
"Three Dimensional Elast-Plastic Dynamic Responses of
High Strength Carbon Mild Steel"
- Rina Sato,
"Pure Benging Strength Behaviors of Hybrid and Dual Hybrid
I-Beam made of Stainless Steel"
- Yusuke Shimazu,
"Experimental Study of Compressive Strength Behaviors of
Having One Stiffener Stub-Column made of SBHS500"
- Kenta Suzuki,
"Experimental Study of Compressive Strength Behaviors of
Stub-Column made of SUS323L and SM570"
2017
-
Haruhiko Kanayama,
"The Distribution of Resudual Stress of Welded Member made of
SUS323L and SM570"
-
Tenta Nishiwaki,
"The Corrosion Behavior of Combined Thick Plates made of
Stainless Steel and Carbon Mild Steel under Outdoor Exposure Test
for Two Years"
-
Eitaro Horisawa,
"The Strength Behavior of Steel Column made of SUS304 at Bothe Ends"
-
Takashi Miura,
"The Compressive Strength Behavior of Stub-Column made of
the Lean Duplex Type Stainless Steel"
2016
-
Shin Otsuka, "Compressive Strength Behavior of the Welded Stub-Column
made of Stainless Steel by Numerical Analysis"
-
Shinsuke Sato,
"Verification of the Applicability of the Ramberg-Osgood Curve to
the Stress Strain Relationship of Stainless Steel"
-
Hironari Takahashi,
"Influence of a Varification of the Stress Strain Relationship for
the Material on the Bending Strength Behavior of the Plate"
-
Yuki Yanadori,
"The Outdoor Exposure Testing of the Jointed Thick Plates at the
quasi-Coast"
2015
-
Toru Ibi, "Compressive Strength Behavior of Single Stiffened Plate Made of
Stainless Steel and Carbon Steel"
-
Keisuke Kobayashi,
"The Modeling of Welding Residual Stress for Stainless Steel Stub-Column"
-
Kosuke Komi,
"Corrosion Behavior of Butt Welding Stainless Steel and Carbon Steel Thic
Paltes by Accelerated Corrosion Test"
-
Yuki Wada,
"Strength Behavior of Hybrid I-Section Beam Made of Stainless Steel and Carbon
Steel in Bending"
2014
-
Haruka Igarashi, "Expressing of Galvanic Crrosion for Welded Stainless and
Carbon Thick Steel Plates by Accelerated Corrosion Test"
-
Kento Iguchi,
"Compressive Strength Behavior for Stub-Column Specimens Made of the Austenitic
and Martensitic Stainless Steels"
-
Yusuke Kazui,
"Compressive Strength Behavior for Hybrid Stiffened Plates of Stainless Steel
and Carbon Steel"
-
Miyako Kikuchi,
"Ultimate Bending Strength for Hybrid I-Section Beam of SUS304 and SM400"
-
Bin Wei Quah,
"Strength Behavior of Simply Supported Stainless Steel Plates under in-Plane
Shearing"
2013
- Kentaro Kato, "Strength Behavior for Simply Supported Plates
of Austenitic Stainless Steel SUS304 under in-Plane Quasi-Statically
Uniaxial Loading"
- Masahiro Takahashi, Ryosuke Watanabe,
"Change in Elastic Modulus of Cr-Ni Stainless Steel due to Increase
Plastic Strain"
- Risa Hiroi,"Experimental Verification for Accelerated
Corrosion Configuration of Carbon Steel Plates
by Using Constant Temperature and Humidity Machine"